Withstands structural loads during transport, installation and use.
Test specimens were subjected to increasing stress until failure to evaluate the material's structural capacity.
Results that prove it
Results
that prove it.
Independent testing and internationally recognized certifications verify the structural,
mechanical, and chemical performance of Fiber Granita™ pools.
Resists bending forces without compromising the structure.
The structure was subjected to flexural loads to simulate stresses encountered during transport, installation, and pool use.
Resists concentrated impacts without loss of performance.
The material was tested against concentrated impacts to evaluate its ability to absorb energy without structural failure.
Maintains surface durability under continuous use.
Surface hardness was measured to verify the surface resistance to wear, scratches, and abrasion.
Maintains color stability when exposed to pool chemicals.
Samples were exposed to chemical agents commonly used in pool water treatment.
ICC certification for the North American market
Technical approval for the U.S. market
ICC certification validates the technical compliance of Fiber technology for evaluation and approval requirements in the U.S. market.
ICC certification reinforces that the pool meets criteria recognized by building codes and authorities in the United States.
Resistance to trichloroisocyanuric acid
Samples before and after chemical testing to evaluate finish stability under exposure to water treatment agents.
Resistance to calcium hypochlorite
Samples before and after chemical testing to verify surface integrity when in contact with pool maintenance products.
Barcol hardness testing
4.7 Barcol Hardness
Table 28 presents the results of the Barcol Hardness test.
| Fluid | Average |
|---|---|
| Original | 39 |
| Cyanuric Acid (98%) | 39 |
| Sodium Dichloroisocyanurate (96%) | 38 |
| Trichloroisocyanuric Acid | 39 |
| Pure Calcium Hypochlorite | 38 |
| Sodium Hypochlorite (10-12%) | 38 |
| Fluid | Readings | Average | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ||
| Original | 38 | 40 | 40 | 41 | 38 | 38 | 38 | 40 | 39 | 39 | 39 |
| Cyanuric Acid (98%) | 39 | 38 | 39 | 40 | 38 | 38 | 38 | 39 | 39 | 37 | 39 |
| Sodium Dichloroisocyanurate (96%) | 36 | 36 | 38 | 38 | 38 | 41 | 38 | 38 | 38 | 39 | 38 |
| Trichloroisocyanuric Acid | 35 | 38 | 38 | 38 | 39 | 41 | 41 | 40 | 38 | 39 | 39 |
| Pure Calcium Hypochlorite | 39 | 38 | 37 | 37 | 40 | 41 | 37 | 37 | 36 | 39 | 38 |
| Sodium Hypochlorite (10-12%) | 40 | 37 | 38 | 39 | 39 | 38 | 38 | 37 | 37 | 39 | 38 |
ICC Certification
Fiber holds certification issued by the International Code Council (ICC), one of the most recognized technical evaluation bodies for construction products.
Certification is maintained through periodic audits and independent factory inspections, ensuring ongoing compliance of production processes and quality standards required for the North American market.
Official certificate
Pool installed in the northern United States, in a region subject to severe freezing and large seasonal temperature swings.
Installed in a desert environment with intense sun exposure and high temperatures for much of the year.
Installed in a region known for ground movement and settlement, requiring consistent structural performance over time.
Built for extreme conditions.
Installed across North America, Latin America, and the Middle East, Fiber pools have proven their performance in a wide range of climates and soil conditions.
Engineered to withstand extreme cold, intense heat, and challenging ground conditions, they deliver long-term structural stability and reliable performance in real-world conditions.
Installed across North America, Latin America, and the Middle East, Fiber pools have proven their performance in a wide range of climates and soil conditions.
Engineered to withstand extreme cold, intense heat, and challenging ground conditions, they deliver long-term structural stability and reliable performance in real-world conditions.
Precision
begins with the mold.
Every Fiber pool begins with high-precision molds engineered to deliver superior surface quality, accurate geometry, and consistent dimensions.
Combined with controlled manufacturing processes and rigorous quality inspections, this ensures every pool
meets the same high standards from the first unit to the last.
Every Fiber pool begins with high-precision molds engineered to deliver superior surface quality, accurate geometry, and consistent dimensions.
Combined with controlled manufacturing processes and rigorous quality inspections,
this ensures every pool meets the same high standards from the first unit to the last.
High-precision molds engineered for superior finish and dimensional accuracy.
Reinforced structural lamination designed for long-term strength and durability.
Every pool undergoes rigorous quality inspection before leaving the factory
Strength is
proven.
Not promised.
International certifications, independent validations, and more than 100,000 installed pools demonstrate Fiber technology performance in real-world conditions.
Strength is
proven.
Not promised.
International certifications, independent validations, and more than 100,000 installed pools demonstrate Fiber technology performance in real-world conditions.
Engineering
that evolves
continuously.
Inside Fiber’s manufacturing facilities, dedicated laboratories and engineering teams continuously develop, test, and refine materials, manufacturing processes, and construction technologies.
Every improvement is validated before becoming part of production, ensuring each new generation of Fiber pools delivers even higher standards of durability, quality, and long-term performance.
Continuous development and validation of materials and processes.
Learn more
Understand the exclusive Granita™ pool technology, compare its benefits, and find the ideal model to transform your outdoor living area.
Frequently Asked Questions • Engineering & Certification
Everything you need to know about engineering, testing, and certifications for Fiber pools.
Engineering and Certification brings together the processes, tests, and validations that support Fiber pool performance. It includes material development, manufacturing control, laboratory testing, and international certifications that prove quality and compliance.
ICC (International Code Council) certification is issued by the International Code Council, one of the most recognized technical evaluation bodies for construction products. It reinforces that the pool meets criteria recognized by building codes and authorities in the United States.
Yes. Fiber performs and commissions independent laboratory testing to validate the structural, chemical, and mechanical strength of Fiber Granita™ Pools, simulating real-world conditions during transport, installation, use, and long-term exposure.
Testing includes structural strength, flexural strength, impact resistance, wear resistance, and fade resistance. Test specimens are subjected to increasing stress, flexural loads, concentrated impacts, surface hardness measurements, and exposure to chemical agents used in pool water treatment.
Yes. Fiber pools are installed across different regions of the world, withstanding intense cold, extreme heat, and installation challenges on various soil types, with consistent performance in residential and commercial applications.
Every pool starts with high-precision molds, controlled processes, and rigorous inspection standards. Steps such as Granita™ application, structural lamination, and final inspection ensure consistent geometry, uniform finish, and repeatability in every unit produced.
Yes. The engineering and laboratory team continuously works on developing materials, production processes, and construction solutions. Through technical analysis, validations, and strength testing, they improve the durability, quality, and reliability of every pool manufactured.
Yes. Certification is maintained through periodic audits and independent factory inspections, ensuring ongoing compliance of production processes and quality standards required for the North American market.
More than 100,000 installed pools demonstrate Fiber technology performance in real-world conditions, complementing international certifications and independent laboratory validations.
Strength is proven. International certifications, independent validations, and experience across tens of thousands of installations demonstrate Fiber technology performance in real-world conditions.
You can explore the Granita Technology, Granita Pool, and Fiber Models pages to learn more about the exclusive finish, manufacturing processes, and available options.
Still have questions?
Didn't find what you were looking for? Send your question and we'll respond as soon as possible.